PSL-K F Types - POSI-LOCK - MIKI PULLEY VIETNAM

These are mechanical shaft locks that use tapers. Tightening the clamping bolt thoroughly couples the shaft and hub.The wedge effect is augmented by a groove installed in the inner sleeve, allowing high transmission torque to be achieved. There are many variations, including a simple anti-rust type and stainless steel specifications.

PSL-K F

PSL-K F Types

[Specifications]

Model	Rated torque ［N・m］	Rated thrust ［N］	Shaft contact pressure ［N/mm2］	Hub contact pressure ［N/mm2］	Tightening torque ［N・m］	Moment of inertia ［kg・m2］	Mass ［kg］
PSL-K-6-F	4.7	1560	120	60	2	2.5×10-6	0.037
PSL-K-6.35-F	4.9	1560	120	60	2	2.5×10-6	0.036
PSL-K-7-F	5.4	1560	100	60	2	2.5×10-6	0.035
PSL-K-8-F	18	4720	230	120	3.5	5.0×10-6	0.056
PSL-K-9-F	20	4720	200	120	3.5	5.0×10-6	0.053
PSL-K-9.525-F	22	4720	200	100	3.5	7.8×10-6	0.069
PSL-K-10-F	23	4720	180	100	3.5	7.7×10-6	0.068
PSL-K-11-F	25	4720	160	100	3.5	7.6×10-6	0.065
PSL-K-12-F	37	6240	200	120	3.5	10×10-6	0.076
PSL-K-12.7-F	40	6240	200	110	3.5	10×10-6	0.073
PSL-K-14-F	44	6240	170	110	3.5	13×10-6	0.083
PSL-K-15-F	76	10160	230	150	7	24×10-6	0.125
PSL-K-16-F	80	10160	210	140	7	27×10-6	0.130
PSL-K-17-F	88	10160	200	130	7	33×10-6	0.145
PSL-K-18-F	88	10160	190	130	7	32×10-6	0.140
PSL-K-19-F	96	10160	180	120	7	40×10-6	0.155
PSL-K-20-F	104	10160	170	120	7	39×10-6	0.150
PSL-K-22-F	168	15200	200	130	7	65×10-6	0.210
PSL-K-24-F	184	15200	180	120	7	76×10-6	0.220
PSL-K-25-F	192	15200	170	120	7	75×10-6	0.210
PSL-K-28-F	304	21600	170	120	12	203×10-6	0.390
PSL-K-30-F	320	21600	160	120	12	230×10-6	0.400
PSL-K-32-F	344	21600	150	110	12	260×10-6	0.425
PSL-K-35-F	504	28800	160	120	12	366×10-6	0.525

*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.

[Dimensions]

Unit ［mm］

Model	d	D	D1	D2	P	L	L1	L2	L3	L4	S	M1	M2
PSL-K-6-F	6	12	25	23	17	10	20	24	3.5	5	1.5	2-M4×8	2-M4
PSL-K-6.35-F	6.35	12	25	23	17	10	20	24	3.5	5	1.5	2-M4×8	2-M4
PSL-K-7-F	7	12	25	23	17	10	20	24	3.5	5	1.5	2-M4×8	2-M4
PSL-K-8-F	8	15	28	26	20	12	24	28	5	5	2	3-M4×10	3-M4
PSL-K-9-F	9	15	28	26	20	12	24	28	5	5	2	3-M4×10	3-M4
PSL-K-9.525-F	9.525	18	31	29	23	12	24	28	5	5	2	3-M4×10	3-M4
PSL-K-10-F	10	18	31	29	23	12	24	28	5	5	2	3-M4×10	3-M4
PSL-K-11-F	11	18	31	29	23	12	24	28	5	5	2	3-M4×10	3-M4
PSL-K-12-F	12	20	33	31	25	12	24	28	5	5	2	4-M4×10	2-M4
PSL-K-12.7-F	12.7	20	33	31	25	12	24	28	5	5	2	4-M4×10	2-M4
PSL-K-14-F	14	22	35	33	27	12	24	28	5	5	2	4-M4×10	2-M4
PSL-K-15-F	15	23	39	36	29	14	29	34	6	7	2	4-M5×12	2-M5
PSL-K-16-F	16	24	40	37	30	14	29	34	6	7	2	4-M5×12	2-M5
PSL-K-17-F	17	26	42	39	32	14	29	34	6	7	2	4-M5×12	2-M5
PSL-K-18-F	18	26	42	39	32	14	29	34	6	7	2	4-M5×12	2-M5
PSL-K-19-F	19	28	44	41	34	14	29	34	6	7	2	4-M5×12	2-M5
PSL-K-20-F	20	28	44	41	34	14	29	34	6	7	2	4-M5×12	2-M5
PSL-K-22-F	22	32	48	45	38	16	33	38	6.5	8	2.5	6-M5×14	2-M5
PSL-K-24-F	24	34	50	47	40	16	33	38	6.5	8	2.5	6-M5×14	2-M5
PSL-K-25-F	25	34	50	47	40	16	33	38	6.5	8	2.5	6-M5×14	2-M5
PSL-K-28-F	28	39	62	59	47	20	39	45	7.5	9	2.5	6-M6×16	2-M6
PSL-K-30-F	30	41	64	61	49	20	39	45	7.5	9	2.5	6-M6×16	2-M6
PSL-K-32-F	32	43	66	63	51	20	39	45	7.5	9	2.5	6-M6×16	2-M6
PSL-K-35-F	35	47	70	67	55	22	43	49	8	10	3	8-M6×18	2-M6

*L1, L2, and S are dimensions before the POSI-LOCK is mounted.

*The nominal diameter of each bolt and tap is equal to the quantity minus the nominal diameter of the screw threads times the nominal length.

Trịnh Nguyễn Thanh Thủy

===============================

[Hotline] + 84 1654 926 912

               + 84 91.663.5500

[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92