ETP-E - ETP BUSHINGS & POSI-LOCK - MIKI PULLEY VIETNAM

The shaft and hub can be easily and quickly coupled using a single pressure screw.This facilitates assembly of equipment that requires positioning in the rotation and axial directions. It is also effective in locations requiring repeated mounting and removal. The concentricity of the shaft and hub is 0.02 mm, so relatively precise positioning is possible as well.

ETP-E

[Specifications]

Model	Rated torque ［N・m］	Rated thrust ［N］	Rated radial load ［N］	Shaft contact pressure ［N/mm2］	Hub contact pressure ［N/mm2］	Tightening torque ［N・m］	Moment of inertia ［kg・m2］	Mass ［kg］
ETP-E-15	46	5100	500	90	70	5	0.043×10-3	0.16
ETP-E-19	85	7300	1000	90	70	5	0.064×10-3	0.20
ETP-E-20	110	9100	1000	90	70	5	0.070×10-3	0.21
ETP-E-22	130	9600	1200	90	70	5	0.097×10-3	0.25
ETP-E-24	190	13000	1400	90	70	5	0.112×10-3	0.27
ETP-E-25	230	15000	1500	90	70	5	0.117×10-3	0.27
ETP-E-28	280	16000	1800	90	70	5	0.170×10-3	0.34
ETP-E-30	380	21000	2000	90	70	5	0.189×10-3	0.35
ETP-E-32	440	22000	2200	90	70	5	0.249×10-3	0.42
ETP-E-35	640	30000	2500	90	70	5	0.325×10-3	0.48
ETP-E-38	890	38000	2800	90	70	21	0.761×10-3	0.84
ETP-E-40	1100	45000	3000	90	70	21	0.844×10-3	0.88
ETP-E-42	1100	43000	3200	90	70	21	0.971×10-3	0.96
ETP-E-45	1400	51000	3500	90	70	21	1.170×10-3	1.05
ETP-E-48	1700	57000	4000	90	70	21	1.458×10-3	1.21
ETP-E-50	1900	63000	4500	90	70	21	1.524×10-3	1.20
ETP-E-55	2400	71000	5000	90	70	21	2.182×10-3	1.50
ETP-E-60	3300	90000	5300	90	70	21	3.167×10-3	1.85
ETP-E-70	5600	130000	6400	90	70	39	7.125×10-3	3.04
ETP-E-80	8700	180000	7500	90	70	39	10.4×10-3	3.75
ETP-E-90	12000	230000	8600	90	70	39	15.2×10-3	4.80
ETP-E-100	17000	280000	9700	90	70	39	21.9×10-3	5.90

*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.

*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20°C.

*ETP-E-55, 60, 70, 80, 90, and 100 are made to order.

[Dimensions]

Unit ［mm］

Model	d	D	D1	D2	L	L1	R	N	M
ETP-E-15	15	18	46	48.9	25	39	15.1	5	1-M10
ETP-E-19	19	23	50.5	53	28	42	17.4	5	1-M10
ETP-E-20	20	24	51.5	54.1	30	44	18	5	1-M10
ETP-E-22	22	27	55.5	60.5	32	46	19.3	5	1-M10
ETP-E-24	24	29	57.5	62.3	33	47	20.3	5	1-M10
ETP-E-25	25	30	58	62.9	35	49	20.8	5	1-M10
ETP-E-28	28	34	63	69.6	38	52	22.6	5	1-M10
ETP-E-30	30	36	64.5	71	40	54	23.6	5	1-M10
ETP-E-32	32	39	68.5	77.7	42	56	24.8	5	1-M10
ETP-E-35	35	42	73	85.1	45	59	26.4	5	1-M10
ETP-E-38	38	46	84.5	89.5	52	72	31	8	1-M16
ETP-E-40	40	48	86.5	91.2	55	75	32	8	1-M16
ETP-E-42	42	51	89	93.5	56	76	33.2	8	1-M16
ETP-E-45	45	54	93	100.3	58	78	34.8	8	1-M16
ETP-E-48	48	59	97	103.8	59	79	36.8	8	1-M16
ETP-E-50	50	60	98.5	105.1	60	80	37.5	8	1-M16
ETP-E-55	55	67	106	115.9	65	85	40.5	8	1-M16
ETP-E-60	60	73	115.5	132.7	70	90	43.3	8	1-M16
ETP-E-70	70	85	135.5	153.9	85	109	50.8	10	1-M20
ETP-E-80	80	97	145.5	162.6	95	119	56.3	10	1-M20
ETP-E-90	90	109	155.5	171.7	105	129	61.8	10	2-M20
ETP-E-100	100	121	166	181	115	139	67.3	10	2-M20

*Dimension φD2 is that before tightening the ETP-EXPRESS.

*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.

Trịnh Nguyễn Thanh Thủy

===============================

[Hotline] + 84 1654 926 912

               + 84 91.663.5500

[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92