ETP-T Models - ETP BUSH - ETP BUSHINGS & POSI-LOCK - MIKI PULLEY VIETNAM

The shaft and hub can be easily and quickly coupled using a single pressure screw.This facilitates assembly of equipment that requires positioning in the rotation and axial directions. It is also effective in locations requiring repeated mounting and removal. The concentricity of the shaft and hub is 0.006 mm, so ultra-precise positioning is possible as well.

ETP-T

[Specifications]

Model	Rated torque ［N・m］	Rated thrust ［N］	Rated radial load ［N］	Shaft contact pressure ［N/mm2］	Hub contact pressure ［N/mm2］	Tightening torque ［N・m］	Moment of inertia ［kg・m2］	Mass ［kg］
ETP-T-15	40	5000	1000	90	70	12	0.09×10-3	0.25
ETP-T-19	90	9000	1000	90	70	12	0.14×10-3	0.31
ETP-T-20	120	12000	2000	90	70	12	0.15×10-3	0.32
ETP-T-24	220	18000	2000	90	70	16	0.40×10-3	0.57
ETP-T-25	290	23000	3000	90	70	16	0.44×10-3	0.60
ETP-T-30	500	33000	4000	90	70	16	0.60×10-3	0.70
ETP-T-35	800	45000	5000	90	70	16	1.00×10-3	1.00
ETP-T-40	1200	60000	6000	90	70	24	1.70×10-3	1.30
ETP-T-50	2000	94000	9000	90	70	24	2.70×10-3	1.70
ETP-T-60	4000	133000	12000	90	70	40	5.00×10-3	2.50
ETP-T-70	6500	186000	13000	90	70	40	8.80×10-3	3.60
ETP-T-75	7800	208000	14000	90	70	40	11.60×10-3	4.20
ETP-T-80	9000	225000	15000	90	70	40	14.37×10-3	4.77
ETP-T-90	13000	288000	17000	90	70	60	24.07×10-3	6.48
ETP-T-100	18000	360000	19000	90	70	80	37.02×10-3	8.41

*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.

*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .

*ETP-T-70, 75, 80, 90, and 100 are made to order.

[Dimensions]

Unit ［mm］

Model	d	D	D1	L	L1	R	N	M
ETP-T-15	15	19	52	25	41	14.5	6	1-M12
ETP-T-19	19	24	58	28	44	18	6	1-M12
ETP-T-20	20	25	59	30	46	19	6	1-M12
ETP-T-24	24	30	71	33	53	23	6	1-M14
ETP-T-25	25	32	73	35	55	23.5	6	1-M14
ETP-T-30	30	38	78	40	60	26.5	6	1-M14
ETP-T-35	35	44	88	45	65	30	6	1-M14
ETP-T-40	40	52	100	55	75	34	8	1-M16
ETP-T-50	50	65	110	60	80	40	8	1-M16
ETP-T-60	60	75	122	70	95	46.5	10	1-M20
ETP-T-70	70	90	138	85	110	52	10	1-M20
ETP-T-75	75	95	146	90	115	56	10	1-M20
ETP-T-80	80	100	154	95	120	58	10	1-M20
ETP-T-90	90	112	170	105	133	64.5	10	1-M22
ETP-T-100	100	125	184	115	145	72	12	1-M24

*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.

Trịnh Nguyễn Thanh Thủy
===============================
[Hotline] + 84 1654 926 912

               + 84 91.663.5500
[email] thuy@songthanhcong.com

[Skype] thanhthuytxt

[Yahoo] thanhthuytxt92